How to maintain wire and cable equipment in Tianjin

In order to prolong the service life of Tianjin wire and cable equipment, it is necessary to make the equipment get reasonable lubrication, so as to reduce the friction resistance of equipment and slow down the wear rate of machine parts, so that the equipment can achieve the purpose of lubrication in operation. It is important for Tianjin wire and cable equipment lubrication management to adhere to the "five fixed" (fixed personnel, quality, quantitative, regular, fixed personnel) system. Make the equipment get good lubrication. Regular oiling is an important link in lubrication of Tianjin wire and cable equipment. It is necessary to add oil, clean and change oil according to the cycle specified in the lubrication chart or card.
Operators and maintenance personnel of wire and cable equipment in Tianjin should master the law of equipment failure, take preventive measures and reduce the downtime. After the failure of wire and cable equipment in Tianjin, the operator should immediately report to the workshop maintenance personnel and machinists to jointly investigate and analyze the fault of the equipment, find out the cause and distinguish the responsibility. The person in charge of the main equipment in the workshop shall organize the personnel in charge of the equipment to analyze the fault situation every month, find out the fault law of the equipment, and take improvement measures for the equipment with high failure intensity and high frequency. After the accident of wire and cable equipment in Tianjin, the power supply shall be cut off immediately. In addition to those who cannot be repaired in time and will increase the accident loss, the site shall be maintained and the person in charge of the equipment in the workshop shall be reported immediately.