Operation and Maintenance of Tianjin Pneumatic Winch
Release Date:
31 Jan,2024
The Tianjin pneumatic winch is powered by a vane-type pneumatic motor, and the power is transmitted to the drum to lift heavy objects through a planetary gear reducer. The pneumatic winch relies on compressed air as the power source to drive the motor, and drives the drum to rotate through two-stage gear reduction, thereby lifting various heavy objects. The Tianjin pneumatic winch is powered by a vane-type pneumatic motor, and the power is transmitted to the drum to lift heavy objects through a planetary gear reducer. The winch is small in size, light in weight, compact in structure, simple in operation and convenient in maintenance, and can realize stepless speed regulation within a certain range. Manual operation without compressed air.
The Tianjin pneumatic winch is powered by a vane-type pneumatic motor, and the power is transmitted to the drum to lift heavy objects through a planetary gear reducer. The pneumatic winch relies on compressed air as the power source to drive the motor, and drives the drum to rotate through two-stage gear reduction, thereby lifting various heavy objects. The Tianjin pneumatic winch is powered by a vane-type pneumatic motor, and the power is transmitted to the drum to lift heavy objects through a planetary gear reducer. The winch is small in size, light in weight, compact in structure, simple in operation and convenient in maintenance, and can realize stepless speed regulation within a certain range. Manual operation without compressed air.
1. Do not disassemble the parts of the tool and operate it at will. This will not only affect, but also cause damage to the tool.
2. If the tool fails slightly or fails to reach its original function after use, it should not be used again, but should be checked immediately. Regularly check and maintain tools, add grease to rotating parts such as bearings, and add oil to parts of air motors.
3. When using various tools, be sure to comply with various regulations and operating instructions.
4. Choose the right working tool. Too large a tool can easily cause injury, and too small a tool can easily cause damage to the tool.
5. The inlet pressure of the tool inlet is generally 90psig, too high or too low will damage the performance and service life of the tool.
keywords:
Related News
Beijing Petroleum Exhibition 2024
20 Jun,2024
27 Apr,2023
Beijing Petroleum Exhibition 2023
20 Jun,2024
Shenzhen Petroleum Exhibition 2022
20 Jun,2024
2021 Beijing Petroleum Exhibition
20 Jun,2024